Using Push Buttons; Viewing Pri Internal Csu Status Information - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 17 Displaying Status Information
Unavailable Seconds
during which service was unavailable.
Cntrl. Slip Seconds
seconds with one or more controlled slips.
Bursty Err. Seconds
seconds with more than one, but less than 320 CRC errors.
Sev. Err. Framing Sec.
number of seconds with 320 or more CRC or OOF errors with
a fatal framing error.
Line Err. Seconds
seconds with line code violations. This is independent of a
Layer 1 connection having been established.
Degraded Minutes
minute intervals) with more than four total errors.

Using Push Buttons

The
Annex PRI Internal CSU Status
Apply
selected.
Save Output
includes the default text directory. You can enter a file name in
the
Selection
all boxes, or press
CSU Status
Help
command. You can save information here.
Close
your display an returns you to the main window.

Viewing PRI Internal CSU Status Information

Using the Command
To display information about the
17-22
lists the number of one-second intervals
(Controlled Slip Seconds) lists the number of
(Bursty Error Seconds) lists the number of
(Severe Errored Framing Seconds) lists the
(Line Errored Seconds) lists the number of
lists the number of minutes (60 consecutive one
window uses the following push buttons:
displays status information about the Annex you
displays the standard
field and press
Cancel
window.
displays a window explaining the
removes the
Annex PRI Internal CSU Status
PRI
CSMIM/Micro-CS Management Application Guide
File Selection
to store the contents of
OK
to return to the
PRI Internal CSU Status
channels you entered:
window, which
Annex PRI Internal
window from