Cabletron Systems CSMIM-T1 Administrator's Manual page 373

pref_load_addr
specifies the IP address for the preferred load host. This is the host from
which the Annex first requests a load of its operational code. You should
set this address to the boot host's IP address.
Type Annex
Values IP address
Default 0.0.0.0
Lists Annex Only, Basic Annex
pref_name1_addr
contains the IP address of the host specified in the
Type Annex
Values IP address
Default 0.0.0.0
Lists Annex Only, Modem
pref_name2_addr
contains the IP address of the host listed in the
the address of a back-up host that serves if
Type Annex
Values IP address
Default 0.0.0.0
Lists Annex Only, Modem
pref_secure1_host
contains the IP address of the security server to which the Annex first sends
security requests. This parameter works only if the
is set to .
enabled
Type Annex
Values IP address
Default 0.0.0.0
Lists Annex Only, Security
CSMIM/Micro-CS Management Application Guide
name_server_1
name_server_2
is set to
name_server_2
enable_security
parameter.
parameter or
.
none
parameter
19-73