Using Push Buttons - Cabletron Systems CSMIM-T1 Administrator's Manual

Using Push Buttons

When you choose a
following push buttons:
Apply
Annexes you selected. The Reset Parameters window appears
if you chose the
menu if the changes you made require the Annexes you
selected to be reset. If you did not choose
Annex Manager resets values without notifying you.
Restore
can change values in the window and then press
display current values for the Annexes you selected. This
button works only if you have not yet pressed
Help
window.
Close
to the main window.
The and
General
use the following push buttons in addition to those listed above:
More
in which it appears. This button appears in the
Async Ports
OK
press
in the series. Annex Manager will not change Annex settings
until you press
(continued)
Cancel
a series. If you change values and then press
Manager will not store the new values you selected.
appears in the
windows.
Edit Port
CSMIM/Micro-CS Management Application Guide
field option, the windows that appear use the
Setup
sets any changes you made in a window for the
Confirm Auto Reset
displays current values for all fields in a window. You
displays a window explaining each Setup mode
removes a window from your display and returns you
options use a series of windows. These windows
Async Ports
displays an additional window related to the window
windows.
returns you the previous window in a series. After you
, you must press
OK
Apply
,
Edit Async Ports
closes a window and displays the previous window in
General (continued)
displays the
Edit Async Ports
option from the main window's
Apply
. appears in the
OK
and windows.
Edit Modem
,
Edit Async Ports
window.
Using Push Buttons
Confirm Auto Reset
Restore
.
Apply
and
General
on the first window
General
, Annex
Cancel
Cancel
and
Edit Modem
,
to
Edit
5-7