Chapter 13 Viewing And Changing Parameters; Viewing Parameter Values; Displaying The Show Window - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 13 Viewing and Changing Parameters

Viewing Parameter Values

lets you see parameter values. You can use this command for the
Show
parameter groups and for the individual parameters you choose from the
main window's parameter list. This section includes:

Displaying the Show Window

Understanding the Show Window Format
Viewing Parameter Values
Displaying the Show Window
Displaying the Window
The command originates in the main window or in the Configure menu.
Show
To use this command:
1 Create an Annex list.
For details about creating lists, refer to .
2 Select the Annexes and parameter groups or individual
parameters you want to include.
3 Choose
and click
The
Show
The example below is the
13-2
or move the pointer to the Configure menu
Show
.
Show
window appears (see Figure 13-1).
To use again without closing the window, repeat step
Show
2. Annex Manager saves all output in the
until you use
window for the
Show
CSMIM/Micro-CS Management Application Guide
or
Close
Clear
Basic_Annex
window
Show
.
group.