Chapter 2 Window Basics
2
Click the mouse button.
An ellipsis (...) following a push button label indicates that pressing the
button will display another window.
Using Radio Buttons
Radio buttons allow you to turn a selection on or off. These buttons are
marked with a diamond shape ( ) that the window manager fills in when
you select a button. Radio buttons always appear in a box in sets of two or
more. You can select only one button in each set.
Selecting Radio Buttons
To use a radio button:
1
Move the pointer to the diamond shape
2
Click the mouse button.
When you select a radio button, the diamond's center is highlighted.
If you select another button in the set, the highlighting of the first
button disappears.
Figure 2-3 shows the radio buttons in the
2-14
Figure 2-3. Radio Buttons
CSMIM/Micro-CS Management Application Guide
( ) .
command.
Boot