Cabletron Systems CSMIM-T1 Administrator's Manual page 364

Chapter 19 Annex Parameters
to indicate that flow control is delegated to a lower level
eia
(e.g., a parallel port).
Type Async
Values none, start/stop, eia
Default none
Lists Async Port, Printer Port, Flow Control, Modem
output_is_activity
defines activity as output. If you enter
timer when it sends output from the port.
Type Async
Values enabled or disabled
Default enabled
Async Port, Dedicated Port, Idle Timer, Modem, Modem
Lists
Internal
output _ start _ char
defines the control character sequence that restarts output if
output_flow_control
Type Async
Value
Ctrl
Default
Ctrl
Lists Async Port, Flow Control
output _ stop _ char
defines the control character sequence that stops output if
is set to
start/stop
Type Async
Values
Ctrl
Default
Ctrl
Lists Async Port, Flow Control
output_ttl
sets the time-to-live (TTL) for packets the Annex generates for RIP updates.
TTL is a field in IP packets that limits their lifetime on the network. Each
19-64
is set to
start/stop
+ any character
+
(displays as ^Q)
Q
.
+ any character
+ (displays as ^S)
S
CSMIM/Micro-CS Management Application Guide
, the Annex sets the inactivity
enabled
.
output_flow_control