Table of Contents
Advertisement
Chapter 15
Comparing and Copying Parameters and Values
Figure 15-7. Copy Command Reset Parameters Window
Identifying Errors
The
and
Compare
displaying warning windows and by listing errors in output and message
boxes. You can encounter errors based on main window selections or on
parameter value limitations. This section includes:
Compare Command Errors
Copy Command Errors
Compare Command Errors
Warning Windows
displays warning windows if you:
Compare
Do not select an Annex or a script from list boxes that contain
more than one Annex or script.
Use the
and do not select an Annex and parameters.
Use
Annex vs. Annex
parameters that require this information.
Use
Script vs. Script
Select a port type that does not match one or more parameter
port types. For example, a warning window appears if you
choose
enter a port number that does not exist in a selected Annex.
15-16
commands notify you about error conditions by
Copy
option for a list with more than one Annex
Annex vs. Annex
, do not enter port information and then select
and select the same script in each window.
type and the
Enet Port
CSMIM/Micro-CS Management Application Guide
group, or if you
Basic_Async_Port
Advertisement
Table of Contents
