Creating Or Modifying A User Defined Group - Cabletron Systems CSMIM-T1 Administrator's Manual

Using the Work Area Box
The displays the parameters in an existing group and stores the
Work Area
parameters you select in the
select one or more parameters from the
to remove the selected parameters from the list.
change an existing group or create a new one from parameters in this list.
Using Push Buttons
User-defined Parameter Groups
View
user defined group. When you select a group from the
box, parameters display in the
Groups
Delete
from Annex Manager files.
Modify
group. It saves the parameters in the
parameters, using the selected group name. For example, if
you want to add a parameter to an existing group or delete one
from it, you can display the parameters, use
<< Remove
parameter group under the same group name. When you use
this button, Annex Manager asks you to verify your changes.
Create
group. When you use this button, the
displays.
Help
command.
Groups
Close
your display.
Creating or Modifying a User Defined Group
You can create your own groups or modify existing ones with the
User-defined Parameter Groups
CSMIM/Micro-CS Management Application Guide
Parameter Groups
uses the following push buttons:
displays the parameters that comprise an existing
removes any selected group and its parameters
overwrites parameters in an existing user defined
, and choose
uses the parameters in the
displays a window explaining the
removes the
User-defined Parameter Groups
command.
Creating Parameter Groups
and
Parameters
and choose
Work Area
Modify
Work Area
Work Area
to store the amended
Modify
Work Area
Name Entry
User-defined Parameter
boxes. You can
<< Remove
and
Create
Parameter
.
as new
or
Add >>
to define a new
window
window from
12-5