Selecting General Settings - Cabletron Systems CSMIM-T1 Administrator's Manual

The left-hand
AppleTalk functions and parameters, IPX, and the CLI tn3270
command. You must contact your supplier to obtain the key
value for the features you choose. Available options appear in
black text; those that are unavailable appear in grey.
The right-hand
LAT-specific Annex commands, parameters, functions, and to
the LAT protocol within the Annex. You must contact your
supplier to obtain a LAT key. After you set the key, your system
administrator must reboot the Annex.
You can use the
the main window.
The box allows you to change dump host information:
Dump
Dump Host
Annex creates dump files. If you do not want dump files, you
can enter
The Password box allows you to change the superuser password.
Superuser Password
used for access to the superuser CLI commands and for
administrative access to an Annex. This password overrides
the CLI lock and virtual CLI passwords. For security reasons,
Annex Manager displays this value as
passwords use 1 to 16 characters.
Using Push Buttons
The
General (continued)
push buttons. For detailed information about push buttons, see .

Selecting General Settings

To view or change values in the
1 Create an Annex list, select one or more Annexes, and press
Setup
The
General
2 Enter or Select new values in any field.
CSMIM/Micro-CS Management Application Guide
Software Options
Software Options
box only when you select a single Annex in
Software Options
contains an IP address for the host on which the
.
0.0.0.0
modifies the Annex's administrative password
window uses the
.
window appears.
Selecting General Settings
box activates routing and filtering,
box restricts access to
set
,
OK
windows:
General
or . These
unset
, and
Help Cancel
6-7