Cabletron Systems CSMIM-T1 Administrator's Manual page 389

subnet_mask
contains the Annex's IP subnet mask. The parameter's default is based
on the network portion of the Annex's IP address. Setting this parameter
incorrectly can cause routing problems.
Type Annex Only
Values IP address
Default 0.0.0.0
Lists Annex Only, Basic Annex
sysContact
identifies the contact person for this managed node, including information
on how to contact this person.
Type Annex
Default n/a
Values 0 to 255 characters
Lists Annex Only
sysLocation
identifies the physical location of this node (e.g., third floor lab).
Type Annex
Default n/a
Values 0 to 255 characters
Lists Annex Only
sysName
contains this node's fully-qualified domain name.
Type Annex
Default n/a
Values 0 to 255 characters
Lists Annex Only
sys_location
supplies host location or identification information for the LAT protocol.
Type Annex
Values 0 to 32 characters
Default " " (null string)
Lists Annex Only, LAT
CSMIM/Micro-CS Management Application Guide 19-89