Table of Contents
Advertisement
1
Move the pointer to the Options menu and select
Parameter Groups
The
User-defined Parameter Groups
12-1).
2
Select an existing group from the
View
The group's parameters appear in the
3
Select the parameters you want to add from the
and press
the Work Area and press
Annex Manager adds or deletes the parameters you choose
in the
Work Area
4
Choose
All parameters in the
If you change a group in the work area and press
pressing
press
area.
CSMIM/Micro-CS Management Application Guide
.
or double click on the group name.
, or select those you want to remove from
Add >>
.
.
Modify
Work Area
, a
Confirmation
Modify
to continue or
OK
You can modify only those groups that you created.
Creating Parameter Groups
window displays (see Figure
Parameter Groups
Work Area
.
<< Remove
become part of the modified group.
window appears. You can then
to return to the work
Cancel
User-defined
box and press
.
box
Parameters
without
Close
12-7
Advertisement
Table of Contents
