Table of Contents
Advertisement
The output box displays:
The
Discovering Annexes, please wait ...
the process has begun.
The
Number of devices to query:
updated number. This number can help you determine how
long the discovery process will take.
Basic information about each Annex, including the Annex's
name or IP address, and system descriptor information, which
can contain the Annex type and software release, the number
of ports for each port type, and the Annex's current image
name.
Information about devices that are not Annexes. If you use the
Verbose Output
lists the names of all devices that are not Annexes, and
Device
prints a brief description or identifies devices as
REACHABLE
The
*** End of discovery ***
process is complete.
Using Push Buttons
Discover Annexes/Search Device
Apply
Update List
with the Annexes displayed in the
you use this button, Annex Manager connects each Annex
again, in case there has been a change in status.
Save List
to a file. When you use this button, the standard
window displays, allowing you to enter a path and file name.
CSMIM/Micro-CS Management Application Guide
option from the Utilities menu,
.
If you enter a short
Annexes/Search Device
NOT REACHABLE
uses the following push buttons:
activates the
Discover Annexes/Search Device
replaces the Annex list displayed in the main window
saves the Annexes displayed in the
message, informing you that
message, followed by a dynamically
SNMP Timeout
may identify a device as
because of network load.
message, informing you that the
Discovery Output
Identifying Annexes
Discover Annexes/Search
NOT
,
Discover
command.
box. When
Discovery Output
File selection
box
17-39
Advertisement
Table of Contents
