Chapter 11
Using the AppleTalk, IP, IPX, and LAT Windows
Understanding the AppleTalk Window
This window uses only the
Default Zone
uses at start-up. You can enter a name using up to 32
characters. You must use spaces to separate words (e.g.,
general engineering lab
backslash (\).
Using Push Buttons
The
window uses the
AppleTalk
push buttons.
Changing AppleTalk Window Settings
Changing Settings
You can enter new values for the
1
Display the AppleTalk window.
2
Enter a new value for the
3
Press
Annex Manager sets new values for the
Using the IP Window
The
window allows you to specify addresses and IP information for the
IP
Annexes you selected in the main window.
Displaying the Window
To display the window, select
11-2
Default Zone
provides the AppleTalk zone name that the Annex
). To escape embedded spaces, use the
Apply
.
Apply
from the
IP
CSMIM/Micro-CS Management Application Guide
field:
,
,
Restore
window's
AppleTalk
.
Default Zone
Default Zone
field.
Setup
, and
Help
Close
field:
Default Zone
.