Copying Parameter Values - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 15 Comparing and Copying Parameters and Values

Copying Parameter Values

Using the Copy Command
You can use the
or port to one or more Annexes or ports. To use this command:
1 Create an Annex List in the main window.
works only for reachable Annexes.
Copy
2 Move the pointer to the Configure menu and select
The
Copy
3 Select one option from the
If you select
group or one or more parameters in the main window.
4 Choose one Annex from the
This list displays reachable Annexes only. If you need to add
an Annex to the list, you can return to the main window and
reissue the
you do not need to select it.
5 Choose a port type.
You can choose a port type only if you chose the
option. The port type you choose must correspond to the port type
in the parameters you selected in the main window.
6 Enter a port number in the field next to the port type button if you
selected
,
Params Printer Port Params, DS1 Line Params
If you chose
parameters you selected.
7 Select one or more Annexes from the
15-14
command to copy parameter values from one Annex
Copy
window displays (see Figure 15-5).
Main Window Params
command. If your list contains one Annex,
Copy
If you selected an option other than
, skip this step and go to step 6.
Params
Main Window Params
, this port type must match those in the
Main Window
If you chose
you do not need to complete this field: skip
this step and go to step 7.
CSMIM/Micro-CS Management Application Guide
button.
Copy Options
, you must choose a parameter
window.
Copy From
that require port information,
, or
Enet Port Params
Annex Only Params
Copy To
.
Copy
Main Window Params
Main Window
Async Port
.
, or
T1 DS1 Params
window.
,