Table of Contents
Advertisement
Chapter 8
Setting ISDN Primary Rate Annex Values
The
outgoing
outgoing or incoming connections. You can select
, or both. These buttons, combined with your selections
incoming
in the
Type
an option is unavailable, it appears in grey: you cannot select
such options
The
box defines the type of access available. This box includes the
Mode
following buttons:
Autodetect
incoming packet's protocol as IPX, PPP, ARAP or CLI.
provides access to modems, serial line printers, and other
Serial
serial devices.
specifies that a connection can perform as a network
PPP
interface using PPP.
allows dial-in Novell access with the Fastlink II client.
IPX
automatically connects a user to a host via the telnet
Telnet
command. You can specify the host and arguments in the
Rlogin/Telnet
specifies that a call can perform as a network interface
SLIP
using SLIP.
allows a terminal or incoming modem access to the Annex
CLI
Command Line Interface (CLI). CLI provides access to the
network and connections to other hosts via the telnet, connect,
rlogin, and tn3270 commands.
specifies that a connection can perform as a network
ARAP
interface using ARAP.
automatically connects a user to a host via the rlogin
Rlogin
command. You can specify the host and arguments in the
Rlogin/Telnet
indicates that one or more Annexes you selected currently
Other
use modes that differ from the options displayed in the
box. You can use the
Customize mode to check these values, or you can select
another option here. You cannot select the
8-4
and
buttons allow the channel to use
incoming
box, determine the
allows an ISDN Primary Rate Annex to identify an
box's
Argument
box's
Argument
command in Annex Manager's
Set
CSMIM/Micro-CS Management Application Guide
options you can use. When
Mode
field.
field.
outgoing,
Mode
button.
Other
Advertisement
Table of Contents
