Understanding The Edit Modem Window - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 9 Editing Modem Definitions

Understanding the Edit Modem Window

Modem definitions reside in the Annex configuration file. Default modem
definitions are stored in
default values, Annex Manager copies the definition from the
places it in the Annex configuration file.
you selected.
uses the following fields:
Edit Modem
Modem Name
or Annexes you selected. For Annexes with asynchronous
ports, this field automatically displays the name that appears
in the
Edit Async Port
Rate Annexes, it displays the internal modem name from the
Annex configuration file.
If this field displays an existing modem name,
String
current values.
If this field displays
provides default values in
Command
default values or enter new values.
9-2
files. If you change a definition that uses
include
The definitions you create or change here apply to all
ports and all Annexes that use the same load host. Your
changes may not apply solely to the Annexes or ports
specifies the type of modem attached to the ports
window's
,
Dialin Setup Command
<undefined>
, and
Dialout Setup Command
If you want to view or edit a definition for a
modem other than the one listed in the
window, press
another name from the list.
If the
Edit Modem
and you enter another existing name,
,
String Dialin Setup Command
not automatically display values for the name you
entered. If you press
Manager will change the definition for the name you
entered to the values displayed in the window. You can
use this method to create a new definition with the
same values as an existing one.
CSMIM/Micro-CS Management Application Guide
field. For ISDN Primary
Modem Name
, and
Dialout Setup Command
or is blank, Annex Manager
Connect Status String
. You can use these
OK
window appears with a modem name
and
Dialout Setup Command
at this point, Annex
Apply
include
Connect Status
display
,
Dialin Setup
here and select
Connect Status
file and
will