Table of Contents
Advertisement
Understanding the Compare Window Format
The
window allows you to choose the Annexes and/or scripts you
Compare
want to match. Once you select an option for comparison, the remaining
boxes and fields in the window change to correspond to your choice. This
section describes the options you can select, and explains the boxes, fields
and remaining buttons in the window.
Primary Rate Annex to an Annex that has asynchronous ports,
because the parameters sets in each Annex are not the same.
Choosing Compare Options
uses option buttons at the top of the window to control the contents
Compare
of list boxes and the fields.
The left-hand button lets you choose a comparison type. You can select the:
Annex vs. Annex
and/or ports, or two ports from a single Annex.
Annex vs. Script
script based on the script's parameters and values.
Script vs. Script
scripts.
The right-hand button appears only when you select the
option. This button lets you narrow comparison criteria. You can select the:
Main Window Params
parameter options you selected in the main window.
Annex Only Params
port parameters.
Async Port Params
parameter values.
The
Printer Port Params
values.
The
Enet Port Params
values.
CSMIM/Micro-CS Management Application Guide
You can compare and copy parameters as long as they
exist in both Annexes and scripts you select. For
example, you cannot copy parameters from a Annex
option to compare two Annexes,
option to compare one Annex and an existing
option to compare the parameters in two existing
option to compare values based on the
option to compare all parameters, excluding
option to compare asynchronous port
option to compare printer port parameter
option to compare Ethernet port parameter
Comparing Parameters and Values
Annex vs. Annex
15-3
Advertisement
Table of Contents
