Table of Contents
Advertisement
Chapter 19
Annex Parameters
than one letter or number, Annex Manager separates characters with a
slash (/). For example,
Type
Async
Values
0 to 16 characters
Default " " (null string)
Lists
Async Port, vci_interface
forwarding_count
controls Annex port behavior for received characters. If you enter a number
other than
, the port does not forward characters until it receives the
0
number of characters you entered. If you enter
. If you use
forwarding_timer
Annex uses the value that occurs first.
Type
Async
Values
0 to 255
Default 0
Lists
Async Port, Idle Timer
forwarding_timer
sets the amount of time in ten millisecond intervals that can elapse before
an Annex forwards received data. If new data arrives before the timer
expires, the Annex resets the timer. If you enter
is Annex Manager's default value.
Type
Async
Values
0 to 255 tens of milliseconds
Default 5 (50 milliseconds)
Lists
Async Port, Idle Timer
group_value
specifies the LAT protocol remote group codes that can access local
services offered by an Annex. To access these services, the Annex must
have at least one enabled group code that matches the service's group
19-44
+
+
a
Ctrl
forwarding_count
Setting
forwarding_count
a severe effect on the network when heavy serial input
occurs.
Setting
forwarding_count
a severe effect on the network when heavy serial input
occurs.
CSMIM/Micro-CS Management Application Guide
, displays as
b
^a/b
, the port uses values in
0
and
forwarding_timer
to
or
1
forwarding_timer
, the Annex uses
0
to
or
1
forwarding_timer
.
parameters, the
to
may have
0
, which
5
to
may have
0
Advertisement
Table of Contents
