Table of Contents
Advertisement
Chapter 4
Using the Main Window
Show Default
Using Check Buttons
uses the following check buttons to change values for one
SNMP Information
or more Annexes or to change Annex Manager's default values:
Update Selected Annex(es) on Apply
Annexes.
Update Default Values on Apply
defaults based on the values in the text fields.
Using Push Buttons
uses the following push buttons:
SNMP Information
Apply
and
Community String
Show Default
fields.
Show Annex
fields. If you selected multiple Annexes that have different
values, a warning window informs you that the
will not display these values.
Help
Close
display.
Viewing and Updating SNMP Information
Using the SNMP Information Command
To check current SNMP information or to change Annex values:
1
Create an Annex list and select one or more Annexes.
4-18
The
SNMP Information
include values for these fields. To display current Annex
values or Annex Manager's default values, you must use
or
Show Annex
activates the command and changes
values.
displays SNMP default values in the window's text
displays current Annex values in the window's text
displays a window explaining this command.
removes the
CSMIM/Micro-CS Management Application Guide
command's initial display does not
.
changes values for one or more
changes Annex Manager's SNMP
window from your
SNMP Information
,
,
Timeout
Retries
SNMP Information
Advertisement
Table of Contents
