Cabletron Systems CSMIM-T1 Administrator's Manual page 315

than one letter or number, Annex Manager separates characters with a
slash (/). For example,
Type Annex
Values 0 to 16 characters
Default " " (null string)
Lists Annex Only, Call Defaults, vci_interface
CallDef_forwarding_
count
controls ISDN Primary Rate Annex behavior for received characters. If you
enter a number other than
it receives the number of characters you entered. If you enter
uses values in
CallDef_forwarding_timer
first.
Type Annex
Values 0 to 255
Default 0
Lists Annex Only, Call Defaults, Idle Timer
CallDef_forwarding_
timer
sets the amount of time in ten millisecond intervals that can elapse before
an ISDN Primary Rate Annex forwards received data. If new data arrives
before the timer expires, the Annex resets the timer. If you enter
Annex uses , which is Annex Manager's default value.
5
Type Annex
Values 0 to 255 tens of milliseconds
Default 5 (50 milliseconds)
Lists Annex Only, Call Defaults, Idle Timer
CSMIM/Micro-CS Management Application Guide
+
a
Ctrl
, the Annex does not forward characters until
0
CallDef_forwarding_timer
parameters, the Annex uses the value that occurs
Setting
CallDef_forwarding_count
to may have a severe effect on the network when heavy
0
serial input occurs.
Setting
CallDef_forwarding_count
to may have a severe effect on the network when heavy
0
serial input occurs.
+ , displays as
b
. If you use
to
to
.
^a/b
, the Annex
0
CallDef_forwarding_count
or
1 CallDef_forwarding_timer
or
1 CallDef_forwarding_timer
and
, the
0
19-15