Using Annex Manager Menus - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 3 Working with Annex Manager Windows
Each command or Setup mode selection uses its own window.
These windows appear when you select pull-down menu
entries or Setup field selections.
Some windows require secondary windows for processing.
Annex Manager uses the following windows, which are
described later in this chapter.
The
or choose an existing file in which to store the scripts and
lists you create. In addition, this window lets you select
files for storing help messages and command output.
The
Annex configuration or when you choose to overwrite an
existing file that you created. This window gives you
information about the changes that will occur.
The
takes a longer than average time for processing. It lets
you know how much processing has occurred and allows
you to cancel the command.
The
Confirm Auto Reset
informs you that Annex Manager will reset the Annexes
you selected.
are secondary windows, this book describes them as part of each
command.

Using Annex Manager Menus

Annex Manager's main window gives you access to all Annex Manager
commands and options through its pull-down menu. This menu is located
just below the window's title bar. The following list describes the menu's
headings as well as the commands and operations it provides:
The
File
Manager commands.
3-2
window lets you enter a path and file name
File Selection
window appears when you change an
Confirmation
window appears if an Annex Manager command
Cancel
window appears only when you select
Reset Parameters
from the pull-down menu. This window
Some commands have their own secondary windows.
For example, the
and
Create Script Execute Script
heading provides tools you can use with Annex
CSMIM/Micro-CS Management Application Guide
window appears only in the
Port Entry
commands. Although these