INSTALLING ANNEX MANAGER
Annex Manager uses simple, step-by-step installation procedures. When
you follow the directions in this section, you can install Annex Manager
easily and quickly. This section includes:
Annex Manager Delivery and Platforms
Installing the Application
Setting Environment Variables
Working with SunNet Manager
Running Annex Manager
Annex Manager Delivery and Platforms
You can receive the Annex Manager installation file (tarfile) on a disk, tape,
or as an electronically-transmitted file. The application runs on AIX™,
HP-UX™, Solaris™, and SunOS™ platforms. You can use the instructions
in this section for any Annex Manager medium or platform.
Installing the Annex Manager Application
Annex Manager installation uses the same installation script as Remote
Annex Software. To install Annex Manager, you extract the installation script
and run it. After you set environment variables, you can run the application.
Annex Manager's installation procedure uses simple, interactive steps.
Using the Installation Script
To install Annex Manager:
CSMIM/Micro-CS Management Application Guide
CHAPTER 1
The directions in this chapter use the
indicate the commands and names you need to type,
and to show you samples of the installation script.
to
window font
1-1