Cabletron Systems CSMIM-T1 Administrator's Manual page 180

Chapter 13 Viewing and Changing Parameters
The check button appears filled. This marks each parameter
that will change.
5 Enter new values or select new options for any marked
parameter.
6 Choose
This step triggers several operations.
A Confirmation window displays, allowing you to check
your work before values change. You can choose
Cancel
continue the
Figure 13-4. Set Command Confirmation Window
A
Reset Parameters
Auto Reset
parameters that require an Annex to be reset. You can
choose
to return to the
Reset
you.
13-12
.
Apply
to return to the
process and change parameter values.
Set
window appears if you selected the
option from the pull-down menu and changed
to continue the process, or
Reset
window. If you did not select
Set
, Annex Manager resets Annexes without notifying
CSMIM/Micro-CS Management Application Guide
window, or
Set
to
OK
Confirm
Cancel
Confirm Auto