Cabletron Systems CSMIM-T1 Administrator's Manual page 341

contacts a DHCP server to request a remote address on
dhcp
behalf of the user.
reads the user's remote address from the
Local
parameter.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, PPP, SLIP
disabled_modules
allows you to disable individual modules to free memory space. If you enter
more than one module, separate module names using commas. For
detailed information about disabling modules, refer to the CSMIM/MicroCS
Administrator's Guide for UNIX . You can enter
, ,
nameserver ppp slip
parameters in non-volatile memory, and reconfigure the Annex.
Type Annex
admin, edit, fingerd, ftpd, lat, nameserver, ppp, slip, snmp,
Values
vci, all, none
Default vci
Lists Annex Only, Basic Annex
CSMIM/Micro-CS Management Application Guide
client. The connection is denied for a remote SLIP
client.
If contains a value and
local_address
to , the Annex uses the local address and
0.0.0.0
negotiates with the remote PPP client for the remote
address. The connection is denied for a remote SLIP
client.
. , , , or
snmp vci all
Disabling prevents access to the Annex from Annex
snmp
Manager. Disabling
if host-based
na
in this case, you must return to monitor mode, erase the
admin
.
none
and
admin snmp
is not available. To change parameters
is set
remote_address
remote_address
, , ,
edit fingerd ftpd
can cause problems
, ,
lat
19-41