Cabletron Systems CSMIM-T1 Administrator's Manual page 322

Chapter 19 Annex Parameters
CallDef_net_inactivity
defines the amount of time an ISDN Primary Rate Annex call can remain
inactive before it is terminated. The
determines whether the number you enter here is in minutes or seconds.
Type Annex
Values 0 to 255
Default 0
Annex Only, Idle Timer, PPP, SLIP, Call Defaults, Sync Call
Lists
Defaults
CallDef_net_inactivity_units
determines the unit of time used for an ISDN Primary Rate Annex's
inactivity timer.
Type Annex
Values minutes or seconds
Default minutes
Annex Only, PPP, SLIP, Idle Timer, Call Defaults, Sync Call
Lists
Defaults
CallDef_newline_
terminal
interprets carriage returns and line feeds for CLI. When you enter
a carriage return or a line feed terminates the input line and a carriage
return followed by a line feed terminates output lines. When you enter
, a line feed terminates both the input and the output lines.
enabled
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_output _ flow _
control
defines the method that a device uses to start or stop output from an ISDN
Primary Rate Annex. You can choose:
to disable flow control.
none
start/stop
characters.
19-22
to designate flow control by recognizing xon and xoff
CSMIM/Micro-CS Management Application Guide
CallDef_net_inactivity_units
parameter
,
disabled