Table of Contents
Advertisement
Minimum Voice Rate
This Þeld speciÞes the minimum operating rate (in bits per second) of all voice
channels when congestion occurs. The default value for this parameter is 4800
bps.
Maximum Voice Rate
This Þeld speciÞes the maximum operating digitization rate (in bits per second) of
all voice channels. The default value for this parameter is 64000 bps.
Changing Parameter Values
You can edit the values in any Þeld which provides a text box or menu button
selection; to do so:
1. To edit a text field, remove the existing value and enter the new value.
2. To edit a field with a menu button, click on the button to display a list of
3. Click on
After you have made system-level changes (such as conÞguring voice parameters), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
NOTE
console management via the [F7] command.
Speed Dial Configuration
The Voice Speed Dial ConÞguration window contains the dial numbers (similar to
telephone numbers) that can be used to call remote devices. The table associates
each of these numbers (called long-dial numbers) with a shorter (usually)
speed-dial number that can be used to call the device, as well as any conÞgured
extended-dial digits that will be forwarded by the device.
To access the window:
1. Click on
2. Drag down to Voice Speed Dial Configuration, and release. The Voice
Speed Dial Configuration
options, then drag down to select the option you want.
to display the Device menu.
Speed Dial Configuration window,
SmartSwitch 1800 Voice Configuration
to save your changes.
Figure
12-2, will appear.
12-5
Advertisement
Table of Contents
