Cabletron Systems CSMIM-T1 Administrator's Manual page 347

input _ flow _ control
specifies the method of flow control for input received from a device
connected to a serial port. You can enter:
to disable flow control.
none
start/stop
characters.
to indicate that flow control is delegated to a lower level
eia
(e.g., a parallel port).
Type Async
Values none, start/stop, eia
Default none
Lists Async Port, Printer Port, Flow Control, Modem
input_is_activity
defines activity as input. If you choose
timer when it receives input at the port.
Type Async
Values enabled or disabled
Default enabled
Lists Async Port, Dedicated Port, Idle Timer, Modem
input _ start _ char
defines the control character sequence that restarts input if
is set to
start/stop
Type Async
Value
Ctrl
Default
Ctrl
Lists Async Port, Flow Control
input _ stop _ char
defines the control character sequence that stops input if
is set to
stop/start
Type Async
Values
Ctrl
Default
Ctrl
Lists Async Port, Flow Control
CSMIM/Micro-CS Management Application Guide
to designate flow control by recognizing xon and xoff
.
+ any character
+
(displays as ^Q)
Q
.
+ any character
+
(displays as ^S)
S
, the Annex sets the inactivity
enabled
input_flow_control
input_flow_control
19-47