Table of Contents
Advertisement
the
Community
the string that appears in the field.
Using the Configuration Area
In Customize mode, the main window's configuration area allows you to
select parameter options for processing. Some Annex Manager commands
use the Annexes you select in the specification area and the parameter
options you select here.
The following example shows the configuration area's initial display.
Figure 4-8. Main Window Configuration Area
To complete this area, you need to select a
individual items from the parameter list. You can then use the
other Annex Manager commands.
Choosing Parameter Options
The Annex Manager commands available through Customize mode use
the Annexes you select in the specification area and the parameters you
select in the configuration area.
The configuration area's
below it:
CSMIM/Micro-CS Management Application Guide
Understanding the Main Window Format
field, Annex Manager attempts to connect using
W
ARNING
Parameter Options
Parameter Option
button controls the lists that display
and choose
,
, and
Show
Set
4-11
Advertisement
Table of Contents
