Using Push Buttons - Cabletron Systems CSMIM-T1 Administrator's Manual

The box provides the following fields:
Logging
Log messages at and above
Annex logs. You can choose:
emergency
to log all Annex reboots.
alert
to log configuration and initialization problems such as
critical
configuration file format errors or lack of memory.
to log all line initialization errors.
error
warning
to log time server queries and information about
notice
responses.
to start and end CLI sessions and Annex jobs created by
info
rlogin, telnet, connect, ping and tap commands.
to start and end any Annex process.
debug
to log messages at all levels.
all
to disable message logging.
none
The box includes the following fields:
Time
Use daylight savings in
savings time in your geographic location. You can select a
single location from the list.
Minutes west of GMT
resides. You can enter a positive number of minutes for time
zones west of Greenwich Mean Time (GMT) or a negative
number for time zones east of GMT. For example, you would
enter 300 for New York, since it is five hours west of GMT, or
-60 for Paris, which is one hour east of GMT.

Using Push Buttons

The window uses the
General
push buttons. For detailed information about push buttons, see .
Close
CSMIM/Micro-CS Management Application Guide
determines the priority levels that the
to log hardware failures.
to log minor problems.
allows the Annex to adjust for daylight
defines the time zone in which the Annex
Using the General Window
,
More Apply
, ,
Restore Help
, and
6-3