Cabletron Systems CSMIM-T1 Administrator's Manual page 81

device cannot be added to the list. For more information about
the
NOT REACHABLE
2 Enter the Annex's SNMP community string in the
The default string for the Annex is
automatically if you do not complete this field.
3 Click
The Annex name appears in the list box. All names appear in
the order in which you enter them.
4 Repeat Steps 1 through 3 for as many Annexes as you need.
If you need to add Annexes later, you can return to this area.
You can save any list using the File menu's
menu also provides the
list. Instructions for saving and opening lists appear later in this chapter.
CSMIM/Micro-CS Management Application Guide
Understanding the Main Window Format
designation, see .
If you enter a valid Annex name and an
incorrect SNMP community string, the Annex
appears in the list as
or press
Add
Return
If you use
can skip steps 2 and 3 by entering an Annex
name and pressing
default community string displays and the Annex
name appears in the list.
Figure 4-6. Annex List
Open Annex List
. This string appears
public
NOT REACHABLE
.
as your community string, you
public
Return
Save Annex List
command, which recreates a saved
Community
.
or . The
Add
command. This
field.
4-7