Table of Contents
Advertisement
fields and buttons display that value. Once you select the check
button, you can enter new values or select new options here.
The
Dsp Diffs
an option button if the combination of Annexes and ports you
selected or ports you selected from one Annex do not have
the same parameter value (see Figure 13-2). When the button
appears, text fields or option buttons remain blank.
Reading the Message Box
The message box monitors
The operation's name surrounded by asterisks. In
Figure 13-2,
A status message confirming the current operation.
following parameters
All parameters included in the group or all parameters you
selected.
The
Set values complete
complete.
Current values when the
performs a
parameters to confirm your changes. Messages related to
this operation appear in the box.
Message boxes contain error messages if you enter incorrect values, if
Annex Manager cannot find values for parameters, if the process times out
and Annex Manager cannot set values for all marked parameters, or if you
enter an incorrect format for fields that require an integer or an IP address.
For more information, see Identifying Errors on page 13-13.
Using Push Buttons
provides the following push buttons:
Set
Apply
message box reflects this operation and provides error
CSMIM/Micro-CS Management Application Guide
(Display Differences) button follows a text field or
You can click
values. For more information, refer to
Changing Parameter Values on page 13-6.
operations. It includes:
Set
*****Set Operation*****
is the status message in Figure 13-2.
message indicating that processing is
Set
operation automatically on the marked
Show
changes values for marked parameters. The
Changing Parameter Values
to display parameter
Dsp Diffs
displays.
operation ends. Annex Manager
Setting the
13-9
Advertisement
Table of Contents
