Selecting Call Default Settings; Using The Channels Window - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 8 Setting ISDN Primary Rate Annex Values
Using Push Buttons
This window uses
For detailed information about push buttons, see .
The button displays a window that allows you to change
Edit Modem
definitions for an ISDN Primary Rate Annex's internal modems. You can
edit internal modems only from this window. For detailed information, see .

Selecting Call Default Settings

This section gives you directions for using Annex Manager's
window.
Selecting Settings
To use the
Call Defaults
1 Display the
2 Enter or change information in the Mode, Interface, Time, or PPP
Security boxes.
If you enter information and then need to return to the values
that displayed originally, you can press
3 Press
Annex Manager changes values for the ISDN Primary Rate
Annexes you selected. You cannot use
Apply

Using the Channels Window

Setup mode's
Channels
B-channel for SLIP or PPP connections.
Displaying the Window
To display the window, select
8-8
,
Apply Restore
window:
window.
Call Defaults
.
Apply
.
window allows you to assign a remote address to a
Channels
CSMIM/Micro-CS Management Application Guide
, , and
Help
Restore
Restore
from the field.
Setup
push buttons.
Close
Call Defaults
.
after you press