Table of Contents
Advertisement
as it exits from its last job. Unlike
disconnect a CLI session with active jobs.
Type
Annex
Values
0 to 255 minutes
Default 0 minutes
Annex Only, Call Defaults, Idle Time, Modem, Modem
Lists
Internal
CallDef_cli_interface
allows you to control the prompt that appears for VMS or UNIX
environments. If you enter
interface, with prompts defined by the
, the standard VMS interface includes the
vci
prompt.
Username>
Type
Annex
Values
vci or uci
Default uci
Lists
Annex Only, Call Defaults
CallDef_cli_security
enables user authentication by the host-based ACP server for all CLI
connections. If you choose
Annex security mechanism other than the administrative password for CLI
connections.
Type
Annex
Values
enabled or disabled
Default disabled
Lists
Annex Only, Call Defaults, Security
CallDef_connect_
security
activates the host-based security policy for access from CLI to the network.
If you choose
enabled
security server to connect to a network host. The security policy in the
CSMIM/Micro-CS Management Application Guide
CallDef_inactivity_timer
, this parameter provides a standard UNIX
uci
, you cannot use any ISDN Primary Rate
disabled
, the user must be authorized via the host-based ACP
, this timer does not
parameter. If you enter
CallDef_prompt
prompt followed by the
Local>
19-11
Advertisement
Table of Contents
