Cabletron Systems CSMIM-T1 Administrator's Manual page 383

compatibility
Type Interface
Values 1, 2, compatibility
Default compatibility
Lists Enet Port, Async Port, Routing
rip_sub_accept
controls whether subnet routes are accepted over the SLIP, PPP, and
Ethernet interfaces. You can enter
to reject them.
Type Interface
Values enabled or disabled
Default enabled
Lists Enet Port, Async Port, Routing
rip_sub_advertise
controls whether the Annex advertises subnet routes over the SLIP, PPP,
and Ethernet interfaces.
Type Interface
Values enabled or disabled
Default disabled
Lists Enet Port, Async Port, Routing
routed
determines whether the RIP routing daemon is enabled. When you enter
, the Annex performs active RIP routing only if
enabled
correct value. If
RIP routing when the daemon is enabled. If you enter
occurs.
after you reboot it or after you reset the routing subsystem.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Basic Annex, Routing
CSMIM/Micro-CS Management Application Guide
to send version 2 packets to the broadcast address
is not set correctly, the Annex performs passive
option_key
If you disable the RIP routing daemon and the Annex
does not reside on the same subnetwork as the Annex
Manager's host, you will not be able to contact the Annex
to accept subnet routes or
enabled disabled
is set to the
option_key
, no RIP routing
disabled
.
19-83