Cabletron Systems CSMIM-T1 Administrator's Manual page 368

Chapter 19 Annex Parameters
Type Async
none, dialinautobaud, dialin, dialinoutautobaud, dialinout,
Values
dialout, autodetect, autoadapt, ipx
Default none
Lists Async Port, Modem, Modem Internal
port_multisession
allows you to select ports that will display two active windows. You can use
this parameter only for ports on which the VCI command interface is
configured.
Type Async
Values enabled or disabled
Default disabled
Lists VCI_Interface
port_password
defines a port password for local password protection. You can use this
password as a back-up for host-based security if the security servers do
not respond, or as an additional line of security after you enter a user name
and password. For security reasons, Annex Manager displays this value
as or .
set unset
Type Async
Values 0 to 15 characters
Default unset
Lists Async Port, Modem, Modem Internal
19-68
To use the multisession feature, you must:
Have a valid LAT key.
Enter for the
enabled
Enter for the
enabled
Reset an Annex if you change values for the
multisession parameters.
If you use SecurID, set
Please refer to the Annex Administrator's Guide for UNIX
for more information about SecureID.
CSMIM/Micro-CS Management Application Guide
parameter.
multisession
parameter.
multisession_port
to a null string (" ").
port_password