Cabletron Systems CSMIM-T1 Administrator's Manual page 93

For information.
change Annex Manager's SNMP default values only, you can
skip this step.
2 Move the pointer to the Option menu and choose
3 Enter new values for
Show Default
Show Default
The values that display when you use
the Annexes you selected in the main window:
If you select a single Annex or multiple Annexes that have the
same values, text fields display current values.
If you select multiple Annexes that have different values, a
warning window informs you that where differences exist,
values will not display. If you choose
circumstance, Annex Manager uses its default values.
4 Select
Update Selected Annex(es) on Apply
Apply.
You can select one or both check buttons.
5 Choose
Annex Manager changes Annex or default values based on
the check buttons you selected and on values in the text fields.
CSMIM/Micro-CS Management Application Guide
Creating Annex Lists
Timeout
or to display current values.
Show Annex
always displays Annex Manager's default values.
.
Apply
Displaying SNMP Information
in this chapter. If you want to
, and/or
Retries Community String
Show Annex
Apply
and/or
Update Default Values on
SNMP Information
or use
depend on
under this
4-19
.