Cabletron Systems CSMIM-T1 Administrator's Manual page 172

Chapter 13 Viewing and Changing Parameters
Controlling Output
The window's
Show
detail that appears in the output box. When you select
output box includes parameter names, MIB definitions, default values, and
current values. If you do not select it,
and current values.
Entering Port Information
The parameters you choose in the main window determine whether you
need to enter port or channel information for
that require this information, you can select a port type and enter port or
channel numbers in fields located below the Output box.
Entering Port Types and Port Numbers
To select a port type and enter port numbers:
1 Hold the mouse on the option button that displays
The menu displays
DS0 Channel(s)
2 Highlight the port type you want and release the button.
You must enter a port type that matches your
selection. For example, if you choose the
you should not select
3 For
Async Port(s)
port numbers or All in the field.
To enter specific ports, separate port numbers with commas
or indicate a range of numbers using dashes. For example,
you might enter
ports 1 through 3 and port 8. For
For ports,
T1
value.
Reading the Output Box
The window's output box lists parameter names and values. The output
box always includes:
A message informing you that you may need to enter port or
channel information when you first use
13-4
button allows you to determine the level of
Verbose Output
Async Port(s)
and
DS1 Line(s)
Enet Port(s)
,
Printer Port(s)
, , to specify three ports, or
1 3 8
displays automatically. You cannot change this
2
CSMIM/Micro-CS Management Application Guide
includes only parameter names
Show
. If you select parameters
Show
,
Printer Port(s), Enet Port(s)
.
Async Port List
here.
, and
DS0 Channel(s)
Enet Port(s)
Show
Verbose Output,
Async Ports
Parameter Options
option,
, enter one or more
to specify
1-3, 8
, you must enter
.
the
.
.
1