Cabletron Systems CSMIM-T1 Administrator's Manual page 378

Chapter 19 Annex Parameters
printer_width
sets the maximum number of characters per line. If you enter
does not insert a new line into the data stream.
Type Printer
Values 0 to 132 characters
Default 0
Lists Printer Port, PPP
prompt
defines the CLI prompt for a specific port. This parameter uses formatting
codes consisting of the percent character and a single lowercase letter.
You can combine these codes (e.g.
you can enter text that will appear in the prompt as long as your entire entry
does not exceed 32 characters. You can enter:
%a to display
% c to display a colon and a space.
%d to display the date and time (e.g.,
%i to display an Annex's IP address.
%j to display a new line character.
%l to display the port's location. If no location is defined, the
port number (e.g.,
%n to display an Annex's name or its IP address.
%p to display the port number of a virtual CLI connection
number preceded by
%r to display
%s to display a space.
%t to display the current time.
%u to display the port's user name.
Type Annex
Values %a, %c, %d, %i, %j. %l, %n, %p, %s, %t, %u
Default Value in
Lists Annex Only, Basic Async Port
19-78
%a%c
Annex.
) appears.
port 10
v.
.
port
parameter
cli_prompt
CSMIM/Micro-CS Management Application Guide
), using up to 16 codes. In addition,
Mon Mar 14 13:59:42 1996
, the Annex
0
).