Cabletron Systems CSMIM-T1 Administrator's Manual page 377

printer_map_to_upper
allows an Annex to convert lower case characters to upper case before it
transmits characters to a printer. This parameter is used for older printers
that do not support lower case characters.
Type Printer
Values enabled or disabled
Default disabled
Lists Printer Port
printer_name
specifies the printer used by the
You must enter a name listed in the
parameter. Please refer to the CSMIM/MicroCS
the
printer_host
Administrator's Guide for UNIX for more information.
Type Async
Values Printer name from
Default " " (null string)
Lists Async Port, TN3270
printer_tcp_keepalive
overrides
tcp_keepalive
to one or more printer ports. If you use
rtelnet
value), the keep-alive timer uses the value set by the
You can enter
255
Type Printer
Values 0 to 255 minutes
Default 0 minutes
Lists Printer Port, Command Line Editing
printer_type
specifies the type of printer attached to the port.
Type Printer
Values centronics or dataproducts
Default centronics
Lists Printer Port, Command Line Editing
CSMIM/Micro-CS Management Application Guide
tn3270
/etc/printcap
for connections from applications such as
to disable the keep-alive mechanism for the printer port.
command's print-screen function.
file on the remote host by
/etc/printcap
file
(Annex Manager's default
0
tcp_keepalive
or
aprint
parameter.
19-77