Chapter 14 Viewing, Creating, and Executing Scripts
(
port_password
Area Transport key (
virtual CLI password (
This section includes:
Displaying the Create Script Window
Understanding the Create Script Window Format
Creating a Script
Editing Script Files
Displaying the Create Script Window
Displaying the Window
The
window originates in the File menu. To display the window:
Create Script
1
Select a single Annex from the main window.
2
Hold the mouse button on the File menu and choose
The
Create Script
processing.
The following example shows the
14-6
For security reasons, you can create a script for any
Annex parameters except the Internet address (
the administrative password (
), the access control protocol key (
lat_key
vcli_password
If you leave the
script, you can check your work easily.
window appears (see Figure 14-2).
You can select
Create Script
return to the main window to select an Annex. The order
in which you perform these steps does not affect
CSMIM/Micro-CS Management Application Guide
password
), the option key (
) parameters.
window open as you create a
View Script
from the menu first, and then
window.
Create Script
inet_addr
), the port password
), the Local
acp_key
), and the
option_key
Create Script
),
.