Using Push Buttons - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 17 Displaying Status Information
displays an estimate of the interface's current bandwidth
Speed
in bits per second.
Oper Status
field can display
Last Change
current operational state.
Reading the Statistics Box
The box displays statistics related to traffic on each interface. This
Statistics
box uses a separate line for information about incoming and outgoing traffic.
It includes the following categories:
Intf Name
shows the total number of octets received or transmitted
Octets
on the interface, including framing characters.
Ucast Pkts
received from or delivered to a higher-layer protocol.
NUcast Pkts
subnetwork-multicast packets received from or sent to a
higher-layer protocol.
Discards
that could not be delivered to a higher-layer protocol. Packets
may have been discarded due to lack of buffer space, and may
not have had errors.
provides the number of packets that could not be received
Errors
or transmitted due to errors.
Unknown Protocols
because of unknown or unsupported protocols.
Queue Length
packet queue.

Using Push Buttons

Annex Interface Status
17-12
shows the interface's current operational state. This
or
Up Down.
indicates the time at which the interface entered its
provides a text description of the interface.
lists the number of subnetwork-unicast packets
lists the number of subnetwork-broadcast or
displays the number of inbound or outbound packets
lists the number of inbound packets discarded
displays the number of outbound packets in the
uses the following push buttons:
CSMIM/Micro-CS Management Application Guide