Cabletron Systems CSMIM-T1 Administrator's Manual page 302

Chapter 19 Annex Parameters
security server maintains the encryption key for each Annex in the
file. For security reasons, Annex Manager displays only
parameter's values.
Type Annex
Values 16 characters
Default unset
Lists Annex Only, Security
alarmsyslog
allows the Annex to generate a syslog at the warning level when it detects
any alarm event. To use this feature you must enable syslogging on an
Annex using the
Type T1 DS1
Values enabled or disabled
Default enabled
Lists T1_DS1
allow_broadcast
permits an asynchronous port to receive administrative broadcast
messages generated by the
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, Basic Async Port
allow_compression
allows an Annex to use TCP/IP header compression for SLIP or PPP
modes. Header compression occurs only when the other side of the serial
link initiates compression.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, PPP, SLIP
19-2
The Annex and the security server can communicate
only when this parameter's value is the same as the
Annex's value in the security server's
,
syslog_facility syslog_host
Boot
CSMIM/Micro-CS Management Application Guide
, and
syslog_mask
and commands.
Broadcast
acp_keys
or for this
set unset
file.
acp_keys
parameters.