Table of Contents
Advertisement
Chapter 16
Booting and Resetting Annexes
Understanding the Broadcast Window Format
The
window uses radio buttons, a message box, and push buttons
Broadcast
to transmit a message to the Annexes you selected. This section explains
these window elements.
Choosing a Broadcast Destination
Before you broadcast a message, you need to choose the type of port to
which you will send it. The window's
types. You can select one of the following buttons:
sends your message to all asynchronous ports and to those
All
that have virtual connections to the Annexes you select.
sends your message to all asynchronous ports on the
Async
Annexes you select.
sends your message to all virtual connections on
Virtual
selected Annexes.
When you choose a destination, you can enter message text.
Writing a Message
This window's
Broadcast Message
Your message can:
16-14
Figure 16-5. Broadcast Window
Broadcast Destination
box lets you enter the text of your message.
CSMIM/Micro-CS Management Application Guide
buttons specify port
Advertisement
Table of Contents
