Cabletron Systems CSMIM-T1 Administrator's Manual page 385

to define the Annex as a file server for the
motd
message-of-the-day file.
to indicate that the Annex is not a file server.
none
Type Annex
Values all, config, image, motd, none
Default none
Lists Annex Only, Basic Annex
server_name
names the Annex in the LAT protocol. The name you enter should match
the VMS host's node name used in the HIC configuration file. Annex
Manager's default value is
(for example,
LAT_080002BF0020
Type Annex
Values 1 to 16 characters
Default LAT + physical ethernet address
Lists Annex Only, LAT
service_limit
indicates the maximum number of services that an Annex can maintain in
its local service table. When the table is full, the Annex removes the service
that has been idle longest. If all services are busy and the table is full, the
Annex discards a new service.
Type Annex
Values 16 to 2048
Default 256
Lists Annex Only, LAT
session_limit_annex
specifies the maximum number of active sessions the Annex allows at one
time.
Type Annex
Values 1 to 1152
Default 1152
Lists Annex Only, LAT
CSMIM/Micro-CS Management Application Guide
followed by the physical ethernet address
LAT
).
19-85