Table of Contents
Advertisement
DISPLAYING STATUS INFORMATION
Annex Manager retrieves information about the status of an Annex, its
ports, and its interfaces. Status commands display hardware and software
information as well as basic performance statistics. In addition, Annex
Manager provides the
all Annexes known to a search device by retrieving its routing table. This
chapter describes these commands in the following sections:
Displaying Annex Status Information
Displaying Asynchronous Port Status Information
Displaying Interface Status Information
Displaying PRI CSU Internal Status Information
Displaying PRI Internal CSU Status Information
Displaying T1 Internal CSU Status Information
Displaying T1 Modem Calls Status Information
Displaying Dial VPN Services (DVS) Status Information
Identifying Annexes
provide information for display only and do not change Annex
configurations.
Displaying Annex Status Information
You can display basic information about a single Annex using the
command. This section includes:
Displaying the Annex Status Window
Understanding the Annex Status Window
CSMIM/Micro-CS Management Application Guide
CHAPTER 17
Discover Annexes
All status windows are snapshots of current values:
status commands do not provide active polling of data.
These commands and the
command. This command identifies
Discover Annexes
command
Annex Status
17-1
Advertisement
Table of Contents
