Cabletron Systems CSMIM-T1 Administrator's Manual page 297

For example, you can set a port to 9600/autobaud by setting
in
9600 rs232PortInSpeed
rs232AsyncPortAutobaud
RFC 1318 Parallel Printer MIB Restrictions
The Annex supports
support
paraOutSigTable
RFC 1389 RIPv2 MIB Restrictions
The Annex supports
not support
rip2PeerTable
Object Name
rip2IfStatStatus
rip2IfConfDomain
RipIfConfAuthKey
ripIfConfStatus
RFC 1243 AppleTalk MIB Restrictions
The Annex does not support the
the , ,
aarp atport ddp
Object Name
atportType
atportNetStart
atportNetEnd
atportNetAddress
atportStatus
CSMIM/Micro-CS Management Application Guide
or
rs232PortOutSpeed
to .
enabled(1)
,
paraNumber paraPortTable
.
rip2GlobalGroup
. Table 10 describes additional restrictions.
Table 10. RFC 1389 RIPv2 MIB Objects
Restrictions
Read only
Not supported
Not supported
Read only
llap
, and groups with the following restrictions.
atecho
Table 11. RFC 1243 AppleTalk
Restrictions
Read only
Not supported
Not supported
Not supported
Read only
Standard MIB Support
and then setting
and
paraInSigTable
, , and
rip2IfStatTable
Read Object
Limitations
None
None
None
None
, , , , and
rtmp kip zip
. It does not
. It does
rip2IfConfTable
groups. It supports
nbp
Read Object
Limitations
None
None
None
None
None
18-11