Table of Contents
Advertisement
Reading the Comparison Output box
The
Comparison Output
between the Annexes and/or scripts you select. If parameter values differ,
or if a parameter name does not exist, the box displays the parameter
information. The
choose. Table 4 describes these formats.
Table 4. Comparison Output Box Information
If values differ and you
select:
Annex vs. Annex
Annex vs. Script
Script vs. Script
one uses a wildcard, the parameter appears in the output box.
When Annex Manager completes
number of differences found. If you repeat the
combination of Annexes and scripts, new information replaces the original
display.
Using Compare Window Buttons
Compare provides the following push buttons:
Apply
Annexes, scripts, and parameters you selected.
CSMIM/Micro-CS Management Application Guide
box reports the differences in parameter values
Comparison Output
The Output Box includes:
Parameter name followed by each Annex
name, port number (if necessary) and the
parameter value.
Parameter name followed by the Annex
name and value, and the script name and
value.
Parameter name followed by each script
name. Parameter values appear if a
parameter exists in both scripts but values
are different. If a parameter exists in one
script but not in the other, the box lists the
parameter name and explains which script
stores the parameter.
The
process considers the wildcard indicator (an
Compare
asterisk (*)) as a special port number. If you select
and the two scripts have the same parameter but
vs. Script
activates the
Comparing Parameters and Values
box format depends on the option you
processing, the box lists the
Compare
Compare
command based on the
Compare
Script
command for another
15-7
Advertisement
Table of Contents
