2
Select the Annexes and parameter options you want to include.
3
Choose
and click
The
Set
The following example is a
values for more than one Annex.
Understanding the Set Window Format
The
window consists of a work area, a message box, a port type button
Set
and port number field, and push buttons. Its format allows you to see and
change current parameter values and to review your work.
Entering Port Information
The parameters you choose in the main window determine whether you
need to enter port, interface, or channel information for the
If you select parameters that require this information, you can select a port
type and enter port or channel numbers in fields located below the
CSMIM/Micro-CS Management Application Guide
or move the pointer to the Configure menu
Set
.
Set
window appears (see Figure 13-2).
window that shows the
Set
Figure 13-2. Set Window
Changing Parameter Values
Basic_Annex
Set
group's
command.
.
Work Area
13-7