Cabletron Systems CSMIM-T1 Administrator's Manual page 360

Chapter 19 Annex Parameters
mop_password
contains the MOP maintenance password. This is an 8-byte password,
where each byte consists of two hexadecimal digits. For security reasons,
Annex Manager displays values as
Type Annex
Values 0 to 16 characters
Default unset
Lists Annex Only, MOP
mop_pref_host
contains the Ethernet address of the preferred MOP load or dump host.
This address consists of six parts separated by dashes. Each part contains
a hexadecimal value.
Type Annex
Values Ethernet address
Default 00-00-00-00-00-00
Lists Annex Only, MOP
motd_file
contains the message-of-the-day file name that is maintained on the load
host. This file resides in the directory you choose during the host installation
process (typically
Type Annex
Values 0 to 16 characters
Default motd
Lists Annex Only, Basic Annex
multisession
allows terminals (i.e., VT420 and VT 330) supporting DEC's Terminal
Device/Session Management Protocol (TD/SMP) to display two active
windows simultaneously. Entering
to all ports on which the VCI command interface is configured.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, VCI_Interface
19-60
).
/usr/spool/erpcd/bfs
CSMIM/Micro-CS Management Application Guide
or .
set unset
here makes this feature available
enabled