Table of Contents
Advertisement
W
Understanding the SNMP Information Window Format
The
SNMP Information
buttons. You can update information that appears in the text fields for one
or more Annexes or you can change Annex Manager's default values.
values are reinstated.
Using Text Fields
SNMP Information
specifies the length of time in seconds that Annex
Timeout
Manager waits for a response. You can enter a number of
seconds here. If you leave this field blank,
Annex Manager's five second default.
controls the number of times that Annex Manager tries
Retries
to reach an Annex or other device on the network. You can
enter a number here. If you leave this field blank, the command
uses Annex Manager's default of 0 (zero) retries.
Community String
uses to communicate with Annexes. You can enter a new string
here. If you do not complete this field, Annex Manager uses
, which is the default community string.
public
CSMIM/Micro-CS Management Application Guide
ARNING
Figure 4-11. SNMP Information Window
window uses text fields, check buttons, and push
Annex Manager saves the values you change using
for an active session only. When you exit Annex
Information
Manager, the original
uses the following text fields:
specifies the SNMP password Annex Manager
Displaying SNMP Information
, and
Timeout, Retries
SNMP Information
SNMP
Community String
uses
4-17
Advertisement
Table of Contents
